Unpacking & Assembly
Q: How do I assemble my Vision Grills Ceramic Kamado?
A: Refer to the setup guide included with your grill for assembly instructions or read our setup guides online.
Q: I own a Professional S-Series grill and am missing the ceramic heat resistance plate.
A: This is an error in your booklet. This part is not needed and does not come with the Professional S-Series grill. You may refer to the following question regarding that part.
Q: I own the Classic B-Series grill. Where does the ceramic heat resistance plate go?
A: The ceramic heat resistance plate packaged with the Classic B-Series grill was designed to minimize risk of the fire bowl cracking as the ceramic expands under extreme temperatures. While the ceramic heat resistance plate was intended to sit underneath the fire bowl to distribute heat, Vision Grills redesigned the fire bowl in 2010 with an expansion joint to eliminate the need for the ceramic heat resistance plate. This expansion joint gap runs from the top to bottom of the rear wall of the fire bowl, which allows for expansion of the ceramic at high temperatures without risk of cracking. This redesign rendered the ceramic heat resistance plate obsolete and you may dispose of it.
Q: The interior ceramic fire bowl does not sit flush.
A: Each interior fire bowl, ceramic dome, and vessel is handmade and may have slight level variance. To accommodate for the possibility of the base of the vessel not being flush, Vision Grills designs each interior fire bowl with three raised feet. If your interior fire bowl does not sit flush, please slightly reposition it until it sits flush and no longer wobbles. Remember that the opening in the fire bowl will still need to face the front of the grill, with the vertical expansion joint in the rear. If repositioning of the interior fire bowl does not resolve the issue, please email email@example.com for additional solutions from our customer support team.
Q: What is the best way to attach the 2nd tier cooking grate?
A: To install the 2nd tier cooking grate:
- Fold the 2nd tier cooking grate into a half moon shape.
- Slightly lift the back of the 1st tier cooking grate.
- Hold the folded 2nd tier grate perpendicular to the 1st tier cooking grate with the two “leg hooks” resting between the 3rd and 4th grate bar from the rear edge of the 1st tier cooking grate.
- Drop the 2nd tier grate forward until parallel with the 1st tier cooking grate.
Attaching the 2nd tier cooking grate can be tricky at first, but it has been designed to ensure a stable surface to eliminate the risk of tipping during use.
Q: What is the best way to transfer the grill to the cart?
A: Moving the grill onto the cart requires two people. Do not attempt to move it alone.
- Assemble the cart completely, ensure casters are LOCKED, and position it next to the box.
- Carefully remove contents of the vessel, including the interior fire bowl, to reduce the vessel weight. Be very careful not to allow the vessel to tip over, as it can be very top-heavy when empty and open.
- Close the dome lid and open the sliding vent (Classic) or remove the ash drawer (Professional).
- Two people are required to lift the grill. Using the opening created by the sliding vent or ash drawer as one handle and the rear hinge as another handle, carefully lift the grill into the cart. Do not use the wooden handle to lift the grill, as it is connected only to the dome and not the vessel.
- Open the dome, carefully reinstall the fire bowl, and continue assembly of the grill.
Q: There is a gap in the back of the interior ceramic fire bowl, is this supposed to be there? If so, what is it for?
A: Yes. The vertical gap (i.e., expansion joint) in the back of the interior fire bowl is an intentional design feature. This expansion joint allows the ceramic to expand and contract, reducing the risk of cracking the interior fire bowl during extreme temperature variation.
Q: How does the expansion joint in the ceramic fire bowl line up inside my grill?
A: The vertical expansion joint sits opposite to the opening in the vessel. It is important that the opening in the fire bowl lines up with the bottom draft vent(s). The expansion joint will then be centered in the rear of the grill, while the opening of the fire bowl lines up with the lower ventilation.
Q: Upon inspection of the interior fire bowl, I noticed a crack running from the bottom of the expansion joint to the center of the fire bowl.
A: Periodically, unglazed ceramic will have surface fractures. These appear as cracks, but will not affect the integrity or performance of the interior fire bowl. If any cracking migrates or the fire bowl breaks, please email a picture of the damage to the Vision Grills customer support team (firstname.lastname@example.org). To keep your fire bowl in the best condition possible, do not remove it after installation.
Q: Do I have to season the grill by running it at a low temperature on the first use?
A: No. Many online resources suggest seasoning Kamado grills for 3-5 hours at low temperatures before using at more extreme temperatures. Since the process for constructing ceramic involves kilning at 2,400+oF, seasoning prior to use is not necessary to improve long-term performance. Many Kamado manufacturers suggest seasoning your grill during the first use to strengthen the gasket adhesive and prevent separation from the ceramic. Vision Grills uses high-quality adhesive for its gaskets, so your Vision Grill is fully operational immediately after assembly.
Q: What should I do if my Vision Grills Kamado does not fit snugly in the cart?
A: Each Vision Grills Kamado is hand-made, so variations in body size are not uncommon. We have designed our cart to accommodate these variations, though sometimes there is a small gap between the cart and the sides of the grill. If there is a sizeable gap between your grill and the cart or you feel your grill is not secure in the cart, please contact the Vision Grills customer support team (email@example.com).
Charcoal & Lighting
Q: How much charcoal is required to achieve maximum temperature?
A: The most important factor in grill temperature is the amount of lit charcoal. There is no correlation between how much charcoal you put in the grill and temperature of the grill. To achieve maximum temperature, Vision Grills recommends filling the fire bowl an inch past the air holes located in the bottom third of the bowl with lump charcoal. Lump size will affect how long the charcoal burns, so you will need to experiment and become familiar with the amount of charcoal needed based on the length of time you will be grilling or smoking.
Q: What type of charcoal is best?
A: To achieve best results, lump charcoal is recommended for lighting ease, reuse, and longer and hotter burning. We recommend using Vision Grills 100% natural lump charcoal.
WARNING: DO NOT USE LIGHTER FLUID OR OTHER CHEMICALS TO IGNITE CHARCOAL. Ceramic grills will absorb these chemical smells and flavors.
Great charcoal is fundamental to achieving grilling perfection and the charcoal you select will directly affect fire quality, temperature control, and flavor profile. Typically, briquettes are composed of sawdust compounded with additives, binders, and chemicals to promote lighting; whereas lump charcoal, the purest form of charcoal, is produced from chunks of hardwood.
Lump charcoal has no chemical additives and burns hotter than briquettes. It also delivers superior temperature control and the ability to create unique flavor profiles with availability in different wood types including: hickory, oak, mesquite, apple, and many others. While lump charcoal can cost up to 30% more than briquettes, it is important to know that less is required to achieve the same temperature as briquettes. Since lump charcoal extinguishes upon shutting down the grill, as opposed to briquettes, which burn fully during each grilling session, you will achieve 50-65% more burn time using lump charcoal.
Q: Can charcoal be reused?
A: Yes, but only lump charcoal may be reused. After shutting down your Vision Grills Kamado, the remaining lump charcoal can be restarted. By doing this, you will use less lump charcoal compared to briquettes. Also, be sure to empty the residual ash from the grill between cooks to maintain proper airflow through the grill.
Q: How do I start my Vision Grills Ceramic Kamado?
A: The Vision Grills Professional Series patent pending ProZone™ is equipped with an integrated electric starter port for quick lighting. Simply fill the interior fire bowl one inch above the air holes with lump charcoal, slide the heating element into the starter port, and plug in. Igniting from the bottom of the charcoal will promote quick and even ignition.
While the Vision Grills Classic B-Series is not designed with the integrated ProZone™, the same lighting efficiency and precision temperature control can be achieved with a few tips. Like the Vision Grills Professional Series, the key to quick charcoal ignition and an even burn is to ignite as close to the bottom of the charcoal as possible. Igniting the bottom of the charcoal on the Vision Grills Classic B-Series can be accomplished in several ways:
- Angled electric heating elements: designed to be placed at the bottom of the charcoal and plugged in, ignition should occur within 8-12 minutes
- Hand held torches: simply create a crater in the center of the charcoal, point the flame at several pieces of charcoal until glowing, then fold the surrounding charcoal on top of the ignited pieces
- Starter blocks: create a crater in the center of the charcoal, place lighter blocks in the center and ignite
- Chimney starter: stuff newspaper into the bottom of the chimney, place charcoal on top, and ignite the newspaper
Q: Can I use lighter fluid to light charcoal?
A: NO. DO NOT USE LIGHTER FLUID to ignite charcoal for use in a Vision Grills Kamado. The ceramic construction promotes moisture retention and will absorb lighter fluid and its fumes, causing unsavory flavors and odors.
Q: Can I use cut wood in my Vision Grills Kamado?
A: Yes, cut wood is an excellent fuel source for a Vision Grills Kamado. While lump charcoal delivers the highest performance, quickest ignition, and flexibility in temperature control, cut wood can also be used. It is important to use wood that has dried and cured sufficiently. Neither lighter fluid nor any other liquid accelerant should ever be used in a Vision Grills Kamado, as the ceramic may absorb undesirable odors and flavors.
Q: How do I control the temperature of my Vision Grills Ceramic Kamado?
A: Vision Grills Kamados are designed with calibrated top and bottom draft vents to allow for superior temperature control. Closing down vents restricts airflow, which reduces available oxygen for the burn. To sear, open all vents to maximize the oxygen feed and burn temperature. Conversely, if you want to smoke for many hours, very little oxygen is needed to achieve a low-temperature burn. Controlling temperature will become easier as you gain experience using the grill. Truly the best part of being a visionary cooker is being in total control. Please refer to your Vision Grills owner’s manual for recommended settings for desired temperatures.
Please note: It is MUCH easier to raise the temperature than it is to lower it. Be careful not to get the fire too hot too quickly, as the temperature will not fall easily and you will have to wait to begin cooking.
Q: How do I achieve indirect heat for smoking and roasting?
A: Vision Grills Kamados are designed for a full range of cooking perfection, including smoking, roasting, grilling, baking, and searing. For food requiring indirect heat, you will need a heat deflector to create a convection environment. Do this by installing the Vision Grills Lava Stone/Heat Deflector. This dual-purpose stone comes with a bracket to suspend the stone above the charcoal in the fire bowl for indirect heat. It can also be used directly on the cooking grates for wood and coal-fired pizzas, tandoor cooking, baking, and other stone cooking recipes.
Q: The temperature does not decrease when I close the draft vents.
A: After closing the vents when you are done with your grill, it is common for the grill to remain hot for at least 6 hours, as the ceramic construction provides superior heat retention. Unlike metal charcoal grills, it is easier to raise the temperature in a Vision Grills Kamado than reduce it. If you are planning on smoking or using other “low and slow” techniques, we advise setting the calibrated top and bottom draft vents to the desired temperature setting recommended in the owner’s manual. Allow the temperature of the grill to remain constant for 10-20 minutes before adding food. This will allow you to achieve the desired cooking temperature. The calibrated vents can be adjusted to raise and lower the temperature as desired.
Q: My Vision Grills Ceramic Kamado is not shutting down and has been at 250+oF for more than four hours.
A: The ceramic construction retains heat, which allows for consistent temperature control and a convection cooking environment. While Vision Grills Kamados are designed to extinguish lump charcoal when all draft vents are shut, the grill will remain hot for different lengths of time depending on the temperature achieved and length of grill time. It is recommended that the grill be allowed to sit uncovered for at least 6 hours before covering.
Q: Why is the fire not getting hotter?
A: Vision Grills Kamados are designed for flexibility in maintaining 200-250oF for smoking, 275-350oF for grilling and roasting, as well as achieving 600+oF temperatures for searing and wood and coal-fired pizzas. This range of temperatures is achieved by how much lump charcoal you ignite, which is controlled by air drawn in from the bottom draft vent and out of the top vent.
To increase temperature, introduce more air flow by opening the bottom and top vents. This will cause the fire to spread. Do the opposite to reduce the temperature. To extinguish the flame, close both the bottom and top vents, cutting off airflow to the fire.
If you are unable to raise the temperature in your Vision Grills Kamado to the desired temperature, something is likely restricting the flow of air between the bottom and top vent. If this is the case, remove the cooking grate and inspect the bottom charcoal grate to ensure no residual ash or charcoal particles are blocking air flow. Additionally, check the ash drawer (Professional Series) or ash chamber (Classic Series) for excess ash buildup that may be restricting air flow. If these solutions do not resolve the issue, please email the Vision Grills customer support team (firstname.lastname@example.org) for additional assistance.
Q: Only the center of my charcoal load is lighting.
A: If only the center of your charcoal load is igniting, something is restricting the flow of air through the bottom draft vent. Remove the cooking grate and inspect the bottom charcoal grate to ensure no residual ash or charcoal particles are blocking air flow. Additionally, check the ash drawer (Professional Series) or ash chamber (Classic Series) for excess ash buildup that may be restricting air flow. If these solutions do not resolve the issue, please email the Vision Grills customer support team (email@example.com) for additional assistance.
Q: I am unable to maintain a low temperature for smoking.
A: The ceramic construction of a Vision Grills Kamado delivers a highly efficient burn rate due to the insulating and heat-retaining qualities of the ceramic.
To achieve a low temperature for an extended period of time, you will want to be proactive rather than reactive in temperature control. Once the fuel is burning on its own, you should begin controlling the temperature. The top vent has a profound effect on temperature, so you will only want to have it slightly cracked. Set the bottom vent dials open to 1 / 6 (Pro Series) or the bottom draft vent to 2 (Classic Series). This will provide enough oxygen for the charcoal to remain lit and maintain a steady temperature. If the temperature stops rising before you hit the desired temperature, open the bottom vents a little more to allow the temperature to rise. You can also adjust the top vent, but a gentle touch is recommended.
Q: When I open the lid on my Vision Grills Ceramic Kamado the temperature drops.
A: While the temperature gauge will drop after opening the top dome, it should return to the previous temperature quickly after shutting the dome. Care should be taken when opening the top dome, however, as this will release heat contained in the grill.
It should be noted that opening the top dome introduces oxygen, which enters the bottom draft vent and exits through the top. This will cause the fire to spread if open for an extended period of time. For this reason, it is important that you minimize opening the top dome to maintain your desired temperature.
Q: Why are there numbers on the top and bottom draft vents?
A: The top and bottom draft vents are calibrated to allow for precision temperature control. The Vision Grills owner’s manual provides recommended draft vent settings to achieve desired temperatures.
It should be noted that lump charcoal, recommended for use in your Vision Grills Kamado, is not uniform in size. Depending on the charcoal you select, slight variance from the vent settings recommended in the Vision Grills owner’s manual may be required.
Care & Maintenance
Q: Can Vision Grills Kamados tip over when I open the dome?
A: Vision Grills Kamados are constructed of high-quality ceramic with the thickest wall design in the industry, so a lot of weight is redistributed when opening the lid. To mitigate the risk of tipping, care must be taken when lifting the dome to install the fire bowl. There is a slight risk of tipping if the interior fire bowl is not installed, as it serves as a counterweight. However, with the fire bowl installed, there is a very low risk of tipping. For this reason, among others, we strongly recommend never removing the fire bowl from your Vision Grills Kamado. The cart with two locking casters also reduces movement and provides superior stability. For ease of lifting, the design team at Vision Grills incorporated two heavy-duty lid springs to deliver the lowest dome lift-weight in the industry.
Q: How do I remove the adhesive label on the side of the shelf?
A: For Vision Grills Kamado owners who are experiencing difficulty with removing label adhesive, we recommend applying a solution of soap and water and scrubbing gently or using Goo Gone®. Scraping may cause damage to the side shelf. If the adhesive is not removable to your satisfaction, or damage occurs, please contact the Vision Grills customer support team (firstname.lastname@example.org) for replacement.
Q: Do I have to cover my Vision Grills Kamado?
A: It is recommended that Vision Grills Kamados be covered when not in use to protect them from the elements and improve lifespan.
IMPORTANT: Wait until your grill is fully cooled before covering to prevent damage to the glaze and cover.
Q: I uncovered my grill and there is a white powder on the exterior. Is this normal?
A: While covering your Vision Grills Kamado is recommended, you should allow the grill to fully cool before covering. Covering the grill when still hot/warm (particularly in extreme cold), can cause the ceramic to condensate. This causes the white powder formation on the exterior. If condensation occurs, simply wipe down the entire grill with a damp cloth and allow it to cool fully before covering in the future.
Q: How do I remove old gaskets?
A: Remove old gaskets with a flat-edged scraper. Clean the rim of the base and lid with acetone (preferred) or rubbing alcohol. If necessary, soak any remaining gasket material with acetone and scrape away. Let dry for at least 30 minutes; the surface must be totally clean for the new gasket to adhere.
NOTE: Do NOT remove the dome lid to remove or replace gaskets.
Q: Should I remove the dome lid when replacing the gaskets?
A: No. The lid does not need to be removed to replace the gaskets.
Q: How do I apply my new gaskets?
A: Start by removing a small section of paper from back of the felt strip to expose the adhesive. Press the gasket firmly down onto the rim removing paper as needed. Bend the gasket around the rim as you press down, being careful not to let the gasket material hang over the inside edge of the rim. Do not stretch the gasket. Trim any excess material. If your gasket should detach, you can glue it back on with any common household adhesive.
Q: Should I take the fire bowl out when cleaning my grill?
A: No. We strongly recommend against removing the fire bowl to clean it. Due to the size and fragility of the fire bowl, it can be easily dropped and fractured (not covered under warranty). If you are looking for a more thorough clean, keep the fire bowl in the grill and use an ash rake or shop-vac to clean out the ash.
IMPORTANT: it is recommended that all Vision Grills Kamados be fully cooled before covering to prevent damage to the glaze.
About Vision Grills
Q: Why do Vision Grills Kamados cost less than other Kamados on the market?
A: Our mission is to deliver a high-value Kamado grilling experience at reasonable prices for all consumers. The Vision Grills executive team has over 50 years of experience in product design and development for several Fortune 500 brands, specifically in delivering high-value products with exceptional quality for less. Vision Grills maintains its own factories where our teams are dedicated solely to hand-crafting each grill with care and quality for your enjoyment.
Q: Can I purchase a Vision Grills Kamado directly from the manufacturer?
A: Vision Grills does not sell directly to consumers. Vision Grills Kamados are available at major retailers throughout the United States, Canada, Australia, Mexico, and other countries. Please visit our retailers page to locate a retailer near you.
Tips & Tricks for Grilling Perfection
Q: Can I use my Vision Grills Kamado during the winter?
A: Absolutely. Year-round grilling is a key feature of Kamado cooking! Unlike metal barbeque grills, the ceramic construction of Vision Grills Kamados provides superior heat retention and consistency even in temperatures well below freezing.
Q: Can I bake with a Vision Grills Kamado?
A: Yes. The ceramic construction of our grills allow users the flexibility to sear, grill, smoke, and bake. Refer to the Vision Grills owner’s manual for draft vent calibration settings for your desired cooking need.
Q: Can I use flavored wood chips in Vision Grills Kamados?
A: Yes. The flavor and aroma from your Vision Grills Kamado can be enhanced by the use of flavored wood chips. To achieve the highest quality flavor, soak a ½ cup of wood chips in water for 30 minutes before grilling. Lift the hinged grate to add wood chips after charcoal is ignited. We recommend using wood from fruit bearing trees (cherry, pecan, apple, peach, etc.) when cooking “low and slow.” If you want to infuse a smoky flavor while grilling things like steaks or beer can chicken, we recommend using hickory, mesquite, or other hardwood chips.